Swanstone SD-DTF-C - Installation Uživatelský manuál stáhnout pdf (Strana 4)

Lift Door Assembly (D) and Panel Assembly (C) onto the base ledge

and slide them onto their respective Wall Jambs (A & B) as shown

above.

STEP 4

Install Door and Panel Assemblies

figure 4

STEP 6

Caulk for a leak proof installation

TO INSURE A LEAK PROOF INSTALLATION:

First: Run a bead of clear mildew resistant caulking around

the outside of shower enclosure where shower unit meets

the shower base and where Wall Jambs meet wall (see

figure 6).

Second: From inside the shower unit, caulk the two(2)

circled areas indicated in figure 6 above (caulk the crevice

where the horizontal member meets the vertical member as

shown in figure 6b).

figure 6

Carefully follow caulking manufacturer's instructions before

using shower.

Unit Installation Screws (shown full size for reference)

STEP 5

Work Corner and Secure Unit

Work the corner of the Door and Panel assemblies to engage their full

length as shown in figure 5. After assemblies are engaged . . . adjust

the unit along the curb as required.

When satisfied, secure the Door and Panel Assemblies to the Wall

Jambs using six(6) #6 x 3/8" self drilling phillips screws (G) three(3)

per side. Secure Assemblies to each other at corner using three(3)

#6 x 3/8" self drilling phillips screws (G).

figure 5

figure 6b

1 2 3 4

Žádné komentáře

Swanstone SD-DTF-C - Installation Uživatelský manuál Strana 4